Useful Tips

Connecting to a remote computer in Windows XP

Pin
Send
Share
Send
Send


The Remote Desktop feature allows you to access your computer from anywhere in the world if you have access to the Internet. Windows XP has such a feature and now you can access this powerful resource.

  1. 1 Remote access must be enabled on all computers to which you want to connect. In order to ensure that it is turned on, follow these steps:

  • 2 Right-click the My Computer icon on your desktop or the Start menu and click Properties.
  • 3 Click the Remote Access tab at the top of the system properties and select the check box next to Allow Remote Assistance to connect to this computer.
  • 4 After you complete these steps, you are ready to connect to another computer. Before you begin, make sure that both computers are turned on and connected to your local area network (LAN). It also helps if both have the same default workgroup configured, if you are not on domain configurations. Most home networks are not on a domain.
  • 5 On the computer from which you will connect, click Start, then select Run and in the new window that appears, enter "mstsc," then press ENTER. OR open START, select ALL PROGRAMS, select ACCESSORIES, select COMMUNICATIONS, then press REMOTE DESKTOP CONNECTION.
  • 6 Enter the IP address or name of the computer you want to connect to in the connection window.
  • 7 Log in with the user name and password provided by the computer owner. You cannot log in to your restricted account using Remote Desktop.
  • Remote computer connection

    You can connect to the remote desktop using software from third-party developers or using the corresponding function of the operating system. Please note that this is only possible on Windows XP Professional.

    In order to log into the account on a remote machine, we need to have its IP address and password or, in the case of software, identification data. In addition, in the OS settings, remote communication sessions should be allowed and users whose accounts can be used for this should be highlighted.

    The access level depends on the name of the user we are logged into. If this is an administrator, then we are not limited in action. Such rights may be required to obtain specialist assistance in case of a virus attack or Windows malfunction.

    Method 1: TeamViewer

    TeamViewer is notable for not having to be installed on a computer. This is very convenient if you need a one-time connection to a remote machine. In addition, no presets are required in the system.

    When connecting using this program, we have the rights of the user who provided us with the credentials and is at that time in his account.

      Run the program. A user who decides to give us access to his desktop should do the same. In the start window, select "Just Run" and we assure that we will use TeamViewer only for non-commercial purposes.

    After starting, we see a window where our data is indicated - identifier and password, which can be transferred to another user or get the same from him.

    To connect, enter in the field "Partner ID" received numbers and click "Connect to a partner".

    Enter the password and log in to the remote computer.

    An alien desktop is displayed on our screen as a normal window, only with the settings at the top.

    Now we can perform any actions on this machine with the consent of the user and on his behalf.

    Method 2: Windows XP system tools

    Unlike TeamViewer, to use the system function you will have to make some settings. This must be done on the computer to which you plan to access.

      First you need to determine on behalf of which user access will be made. It will be best to create a new user, always with a password, otherwise, it will be impossible to connect.
        Go to "Control Panel" and open the section "User accounts".

    Click on the link to create a new record.

    We come up with a name for the new user and click "Further".

    Now you need to select the access level. If we want to give the remote user maximum rights, then leave "Computer Administrator"otherwise select "Limited entry ". After we resolve this issue, click "Create an account".

    Next, you need to protect the new "account" with a password. To do this, click on the icon of the newly created user.

    Select item "Create Password".

    Enter the data in the appropriate fields: new password, confirmation and prompt.

    Without special permission, it will be impossible to connect to our computer, so you need to perform one more setting.

      AT "Control Panel" go to the section "System".

      Tab Remote Sessions put all the checkmarks and click on the user selection button.

      In the next window, click on the button Add.

      We write the name of our new account in the field for entering the names of objects and check the correctness of the selection.

      It should turn out like this (computer name and username after the slash):

      Account added, click everywhere OK and close the system properties window.

    To make a connection, we need a computer address. If you plan to communicate via the Internet, then find out your IP from the provider. If the target machine is on the local network, then the address can be found using the command line.

    1. Push shortcut Win + rby calling the menu "Run", and introduce "Cmd".

    In the console, write the following command:

    The IP address we need is in the first block.

    The connection is as follows:

      On the remote computer, go to the menu "Start"expand the list "All programs", and, in the section "Standard", to find “Remote Desktop Connection”.

    Then enter the data - address and username and click "To plug".

    The result will be approximately the same as in the case of TeamViewer, with the only difference being that you first have to enter the user password on the welcome screen.

    Conclusion

    Using the built-in Windows XP feature for remote access, keep in mind security. Create complex passwords, provide credentials only to trusted users. If you do not need to constantly keep in touch with the computer, then go to "System properties" and uncheck the boxes that allow remote connection. Do not forget about user rights: the administrator in Windows XP is “king and god”, so with caution, let outsiders “dig” into your system.

    Thank the author, share the article on social networks.

    How to set up remote desktop in Windows XP

    Setting up Remote Desktop (via RDP) in Windows XP is surprisingly simple. First, go to the system properties (Control Panel -> System), select the "Remote Sessions" tab and check the box "Allow remote access to this computer" (see figure below).

    We click on the button "Select remote users" and there among the computer accounts we select and add to the list those that should be used to connect to the remote desktop. In order to be able to log in using an account, it must have a password.

    Among other things, you need to check that the service "Terminal Service" is enabled and working (Control Panel -> Administrative Tools -> Services).


    Now, to connect, on another computer on the local network, we start the connection to the remote desktop (start -> execute -> mstsc), specify the IP address of the computer to which you want to connect (the first computer) and click connect (see figure).

    An authorization window appears in the system, enter the username and password (of the account on the remote computer for which we allowed access through the remote desktop) and log in to the system.

    Pin
    Send
    Share
    Send
    Send